How to Use SMOK Xpro M50 Box Mod?

XPro M50 is a newly designed box mod from SMOK. It aims at more fabulous looks, as well as much better performance. With a compact size, elaborate details and powerful output, it will be a new generation of e-cigarette battery. Here we are going to introduce how to use it with following steps:

1. Battery installation;

Note: Only accepts one IMR 18650 battery. There is a sticky tape on the battery tube, please remove it before installing a battery.

2. Product Performance

A. The constant power range is 6W to 50W, automatically match with atomizer resistance.

Note: The wattage can be adjusted by pressing the "+" or "-" button, each increase or decrease is 0.1 watt. And the adjustment will be speed up by long pressing the "+" or "-" button.

B. Display function: The screen can display atomizer resistance, voltage, wattage and battery power level.

Note: The voltage will be 0.0V if users do not press the power button to smoke, shown in the second picture.

C. Low voltage warning: When the voltage is lower than 3.4V, the mod will warn the voltage is too low, so as to protect the battery.

D. Short circuit and low resistance protect: When the output is short circuit or low resistance, the mod will automatically cut off its output.

3. Setting Mode

A. When the mod is power on, press the power button 3 times in 2 seconds, the screen will display menu. Users can select the menu by pressing the power button.

B. Menu 1 shows , wait for 2 seconds or have a long press, users can select “Wattage mode” or “MECH mode".

If the "Wattage Mode" is selected, the Mod will be back to the interface showed in following pictures:

If the "Mech Mode" is selected, the Mod will be back to the interface showed in following pictures:

C. Menu 2 shows , wait for 2 seconds or have a long press, users can select “Power on” or “Power off” mode.

If the "Power OFF" is selected, the Mod will be turned off.

4. Function Test

A. Check Atomizer. When the atomizer resistance is lower than 0.2ohm or higher than 9.9ohm, or no atomizer connects with the mode, the screen will display “Check Atomizer”

B. Power Reduce. If the screen displays “Power Reduce”, which means the battery cannot load current output power and the system will reduce the power automatically.

C. Screen Lock. Press the power button 5 times in 2 seconds, users can lock or unlock the screen.

D. Weak Battery. If the screen displays “Weak battery”, which means the battery power is lower than 3.4V, the mod will be standby.

Here you can check the lowest price for today