How to Use IPV3 Li?

Note: If the pics under following article cannot show up, please visit our forum to check:

1. http://www.ecigssa.co.za/how-to-use-ipv3-li-upgrade-to-200w.t12769/

2. http://www.vaportalk.com/forum/topic/26836-tutorial-with-pics-upgrade-ipv3-li-to-200-watts/

A. Body instruction

There are 3 buttons and 1 OLED screen on the body, and the IPV3 Li can only accept 2 18650 batteries. Following information can be shown on the OLED screen: Output power, Output voltage, Resistance, and Battery level. As shown in following pictures:

B. Operation instruction

1. Turn On/Off

Press the Power button 5 times continuously to turn the device ON. 

Once turning on, users can see the logo of  “Pioneer4you”, “iPV3 Li”, and then step into the standby mode. 

Five click the fire button to enter the menu, and click the fire button to choose “System On” menu, then click the “+” button, the system will be OFF.

2. Battery Install

Two 18650 batteries are required.

3. Wattage Adjustment

Press the “+”, “-” button to adjust the wattage.

The adjustment will speed up when keep pressing the +/- button for a long time.

4. Wattage Memory Function:

A. There are five default wattages, M1(20W), M2(40W), M3(60W), M4(80W), and M5(165W). 

B. Change the default wattage to a desired wattage. Choose the level you want, press the “-” then “+” button to adjust the wattage to your like. 

C. press the fire button to let the mod remember this wattage.

For example, I want to change my default M1 to 30W: press "-" button to adjust the wattage to any wattage, for example 29.3W, on the screen, the M1 will be turned to ADJ, and then press the "+" button to increase the wattage to 30W, when it reaches 30W, the screen also shows ADJ, but if you press the fire button now, the ADJ will be M1. That is to say, the default M1 has changed from 20W to 30W.

5. Temp-limited Function

A. Click the fire button to enter the menu, then press the fire button to keep the screen showing Joule Mode or Power Mode;

B. Press “+” or “-” to choose “Joule Mode”, which is the temp-limited mode, and press the fire button to confirm your choice;

C. After you confirm to choose the Joule Mode, the screen will show Unit ℉ or Unit ℃, that is for you to choose the temperature unit, also press the “+” or “-” to choose one unit and press the fire button to confirm your choice;

D. After you confirm the temperature unit, the screen will show the temperature you want, you can adjust the temp by pressing the “+” or “-” buttons. After you set the temperature, also press the fire button to confirm;

The range for unit ℃ is: 100℃ to 300℃

The range for unit ℉ is: 212℉ to 572℉

E. After you confirm the temperature setting, the screen will show EXIT ON, just press the “+” or “-” button. Then you will access to the Temp-limited Mode;

F. Under the Temp-limited Mode, users can hold both of the “+” button and “-” button to check atomizer resistance;

G. There are also Wattage Memory Function under the Temp-limited Mode.

5. Touch Sensor

When the device is on, just touch the sensor on the top, the device will open fire.

Keep pressing the "-" button & Fire button, the screen will show "Touch Off"; Keep pressing the "+" button & Fire button, the screen will show "Touch On"; 

6. Software Upgrade/GUI Operate

There are 2 files users need to download at first:

A. Yihi SXi Setup: Please download it here and install it in your computer;

B. Upgrading file: SX330_iPV3Li_T_200W_20150623-1034_V1.6.SXI, please download it here. Then connect the IPV3 Li to your computer via the USB cable to operate the upgrade function. 

Here are the following steps:

① Click Connection, Install Driver and select SX350

② Once installed, click connect

③ Click Return and then Click Upgrade

④ Click Open File and select the upgrading file (the second downloaded file). After doing so, click Upgrade.

7. Functions for 200W IPV 3 Li

A. Output wattage range: 10-200W;

B. Accept Titanium (Ti) coils;

C. For Ti coils under the Joule Mode, the Joule range is 10-100J

 Interested in IPV3 Li Box Mod? Check the lowest price for the day Here